Installing the License Server
Configuring a PC with a Chromeleon Server

In the Server Configuration program, establish the license reference for a PC on which a Chromeleon server is installed.

1. Start the local Chromeleon server via the Server Monitor program. For the moment, the server runs in Evaluation Mode, as no license is available. Click Start > Program > Chromeleon > Server Configuration to start the Server Configuration program.

2. When the connection to the Chromeleon License Server is successful, assign the server properties. Select the server, and then select Properties on the context menu. The Server Configuration dialog box appears.

3. On the License tab page, select License Server. The Key Code input field is disabled, as it is no longer required. Click the Browse ('...') button next to License Server to open another dialog box.

4. Select the computer on which the License Server runs. Enter the name of the License Server PC. Or else, select a PC from the network list in the right window section. In addition, select a network protocol from the protocol list by means of which the local PC can connect to the license server PC.

   Tip:

   If "Server not found" is displayed in the list on the right, a firewall may be active on the PC and CmLicSrv.exe is not included in the exceptions list. Also refer to Chromeleon and Windows Firewall (from WinXP SP2 on).

5. Close both dialog boxes by clicking OK. This action reconfigures the local Chromeleon server. The license will now refer to the selected Chromeleon License Server whenever the connection is successful with these settings.

6. Save these settings, using the Save Installation command on the File menu.

Also, refer to  Configuring a PC with a Pure Chromeleon Client.

If problems occur during installation, refer to  Troubleshooting (License Server) for possible remedial actions.